1-877-780-2131
Special Offers - Limited Time - Limited Quantities - Click for Details
LSI
Acrobat icon Acrobat Reader
Required to view PDF files
Flash icon Flash Player
Required to view videos
Site Home > Service & Support > Replacement Parts > Proper LSI Tester Battery Connection

Proper LSI Tester Battery Connection

Battery Connection Warning For Yellow & Blue Panel Testers

When replacing the battery (#025-1000-0240-00) on a Larson Systems tester with a yellow or blue panel, care must be taken to ensure proper connection between the battery and the electronic board.   If the battery is connected incorrectly, the board will be DESTROYED IMMEDIATELY, and the warranty WILL BE VOIDED.

The terminal connected to the battery will have two prongs on itís top.  These prongs are to help guide and lock the terminal connected to the board into place.  It is very important that the terminals are lined up so the prong from the board terminal fits into the prongs on the battery terminal.

Proper Battery Connection


If you have any questions or concerns about connecting the new battery for your tester, feel free to call us at 763-780-2131, or toll free at 1-877-780-2131 and a service representative will be happy to assist you.

Our business hours are Monday through Friday, 8 am to 4:30 pm Central Standard Time.
 

Top icon
Larson Systems Inc.
13847 Aberdeen Street NE
Ham Lake, MN 55304
Phone: 763-780-2131
Fax: 763-780-2182
Top icon
LarsonSystems.com    |    SpringTesters.com    |    SpringGages.com
LSI LSI LSI LSI LSI LSI LSI LSI LSI LSI LSI LSI LSI