Larson Systems Inc. - Wire Crimp Test Gages

LSI

Force Gages, Stands & Accessories >>>

LSI Warranty

LSI Product Warranty


	Print This Page
Helpful Links
	Acrobat Reader (required to view PDF files)
	Flash Player (required to view LSI videos)

Home > Products > Force Gages, Stands & Accessories > Wire Crimp Test Gages

Wire Crimp Test Gages
Standard Features Zero maintenance Simple to use - "Good" if crimp holds, "Bad" if it slips Configurable - simply attach weights to bottom to desired net weight Accommodates wire from 22 AWG to 30 AWG	Full Custom Options List (U.S. Pricing Only)
Simple Operation The simplest and most straight-forward pull test for wire crimps is LSI's Wire Crimp Text Gage. This crimp wheel fixture features 18 slots ranging from 0.031" to 0.437" and can accommodate up to #4 gage wire. Immediately test your wire crimp's integrity by inserting the crimped end of the wire into the appropriate slot of the wheel pull fixture, and lift up until either the crimp slips free (bad) or the weight is lifted free (good). A small dowel pin in the large slot is available for testing ring-type wire terminals. 18 slots ranging from 0.031" to 0.437" The upper crimp fixture itself weighs 1.5 lb, and comes with the following detachable weights: 0.5 lb, 1 lb, 2 lb, 2 lb, and 5 lb. The maximum configurable weight is 12 lb. See the chart below for some common tensile strength standards.


	Larson Systems Inc. 10073 Baltimore Street, NE Minneapolis, MN 55449-4425	Phone: Toll-Free: Fax:	763-780-2131 1-877-780-2131 763-780-2182	www.larsonsystems.com www.springtesters.com www.springgages.com