| |
|
SDHT
2000 Wide Body |
Standard Features
- Compression testing of force and length
- Tracking or peak modes (2,000 samples / sec)
- Load cell and frame deflection compensation
- Mechanical and software overload protection
- Built-in shunt calibration verification
- Backlit digital LED display of force and length
- Wipe-clean embossed key faceplate
- Push button force and length zeroing
- Push button English or metric unit selection
- User programmable filter
- Length / force offset
- Customizable print headings
- Front panel digital calibration
- NIST traceable calibration
- Ultra-Rigid four column design
- Smart interchangeable load cells
- Internal 8-hour battery for portable use
- RS 232 data communications port
- Statistical summary printout
- Built-in 1,800 test point data logger
- Complete computerized tester diagnostics
- 20-bit internal force resolution
|
|
Faceplate
This is the heavy-duty super-rigid version of our SDHT.
Our most accurate and heavy-duty hand tester has “smart” interchangeable
load cells. This is a tester that can measure grams to two decimal places
and then change load cells and test up to 2,000 pounds. It has a very rugged
four post design to minimize frame deflection and give the user the most
versatility and productivity in a single tester. It has a 13” stroke,
an 18” range and can test parts up to 16” in diameter.
The tester is made from a combination of billet aluminum and precision ground
steel parts. The rack and pinion drive is lever (standard) or hand-wheel operated
(optional).
1) Limit
lights for part sorting and a statistical summary printout that
includes a histogram and data run chart.
2) Two-Point
with Rate Software; test two points with spring rate calculation
in one deflection of the spring.
 |
Stroke Lock |
It is equipped with two positive stops to be used for repetitive testing and
comes standard with a 0.438” Ø thru-hole for centering shafts for
supporting buckling type compression springs. The tester has 5/8-18 tooling holes
for convenient fitting.
SDHT 2000 Wide Body - Force Specifications |
| Part No. |
Capacity |
Resolution |
|
Part No. |
Capacity |
Resolution |
| 0-20% FS |
20-100% FS |
0-20% FS |
20-100% FS |
| 025-0000-0394-01 |
2 lb |
0.00002 lb |
0.0002 lb |
025-0000-0394-06 |
200 lb |
0.005 lb |
0.05 lb |
| 907 g |
0.01 g |
0.1 g |
91 kg |
0.002 kg |
0.02 kg |
| 8.9 N |
0.0001 N |
0.001 N |
890 N |
0.02 N |
0.2 N |
| 025-0000-0394-02 |
11 lb |
0.0002 lb |
0.002 lb |
025-0000-0433-00 |
750 lb |
0.02 lb |
0.2 lb |
| 5 kg |
0.1 g |
1 g |
340 kg |
0.01 kg |
0.1 kg |
| 49 N |
0.001 N |
0.01 N |
3,336 N |
0.1 N |
1 N |
| 025-0000-0394-03 |
22 lb |
0.0005 lb |
0.005 lb |
025-0000-0433-01 |
1,500 lb |
0.1 lb |
1 lb |
| 10 kg |
0.2 g |
2 g |
680 kg |
0.05 kg |
0.5 kg |
| 98 N |
0.002 N |
0.02 N |
6,672 N |
0.5 N |
5 N |
| 025-0000-0394-04 |
66 lb |
0.001 lb |
0.01 lb |
025-0000-0433-02 |
2,000 lb |
0.1 lb |
1 lb |
| 30 kg |
0.5 g |
5 g |
907 kg |
0.05 kg |
0.5 kg |
| 294 N |
0.005 N |
0.05 N |
8,896 N |
0.5 N |
5 N |
| 025-0000-0394-05 |
110 lb |
0.002 lb |
0.02 lb |
Accuracy =
± Resolution x 2 |
| 50 kg |
0.001 kg |
0.01 kg |
| 489 N |
0.01 N |
0.1 N |
SDHT 2000 Wide Body - Length Specifications |
| Capacity |
Standard Resolution |
| Resolution |
Accuracy (±) |
| 2, 11, 22, 66,
110 & 200 lb |
0.0005 in |
0.001 in |
| 0.01 mm |
0.02 mm |
| 750, 1,500 &
2,000 lb |
0.0005 in |
0.002 in |
| 0.01 mm |
0.04 mm |
|
|
|
