| |
|
SDHT
2000 |
Standard Features
- Compression testing of force and length
- Tracking or peak modes (2,000 samples / sec)
- Load cell and frame deflection compensation
- Mechanical and software overload protection
- Built-in shunt calibration verification
- Backlit digital LED display of force and length
- Wipe-clean embossed key faceplate
- Push button force and length zeroing
- Push button English or metric unit selection
- User programmable filter
- Length / force offset
- Customizable print headings
- Front panel digital calibration
- NIST traceable calibration
- Rigid two column design
- Smart interchangeable load cells
- Internal 8-hour battery for portable use
- RS 232 data communications port
- Statistical summary printout
- Built-in 1,800 test point data logger
- Complete computerized tester diagnostics
- 20-bit internal force resolution
 Download
User Manual
Optional Micro Adjust Controls
|
|
Faceplate
This is the heavy-duty version of our SDHT.
Our most accurate and heavy-duty hand tester has “smart” interchangeable
load cells. This is a tester that can measure grams to two decimal places
and then change load cells and test up to 2,000 pounds. It has a very rugged
two post design to minimize frame deflection and give the user the most versatility
and productivity in a single tester. It has a 13” stroke, an 18” range
and can test parts up to 8” in diameter.
The tester is made from a combination of billet aluminum and precision ground
steel parts. The rack and pinion drive is lever (standard) or hand-wheel operated
(optional).
1) Limit
lights for part sorting and a statistical summary printout that
includes a histogram and data run chart.
2) Two-Point
with Rate Software; test two points with spring rate calculation
in one deflection of the spring.
Stroke Lock
It is equipped with two positive stops to be used for repetitive testing and
comes standard with a 0.438” Ø thru-hole for centering shafts for
supporting buckling type compression springs. The tester has 5/8-18 tooling holes
for convenient fitting.
SDHT 2000 - Force Specifications |
| Part No. |
Capacity |
Resolution |
|
Part No. |
Capacity |
Resolution |
| 0-20% FS |
20-100% FS |
0-20% FS |
20-100% FS |
| 025-0000-0394-01 |
2 lb |
0.00002 lb |
0.0002 lb |
025-0000-0394-06 |
200 lb |
0.005 lb |
0.05 lb |
| 907 g |
0.01 g |
0.1 g |
91 kg |
0.002 kg |
0.02 kg |
| 8.9 N |
0.0001 N |
0.001 N |
890 N |
0.02 N |
0.2 N |
| 025-0000-0394-02 |
11 lb |
0.0002 lb |
0.002 lb |
025-0000-0433-00 |
750 lb |
0.02 lb |
0.2 lb |
| 5 kg |
0.1 g |
1 g |
340 kg |
0.01 kg |
0.1 kg |
| 49 N |
0.001 N |
0.01 N |
3,336 N |
0.1 N |
1 N |
| 025-0000-0394-03 |
22 lb |
0.0005 lb |
0.005 lb |
025-0000-0433-01 |
1,500 lb |
0.1 lb |
1 lb |
| 10 kg |
0.2 g |
2 g |
680 kg |
0.05 kg |
0.5 kg |
| 98 N |
0.002 N |
0.02 N |
6,672 N |
0.5 N |
5 N |
| 025-0000-0394-04 |
66 lb |
0.001 lb |
0.01 lb |
025-0000-0433-02 |
2,000 lb |
0.1 lb |
1 lb |
| 30 kg |
0.5 g |
5 g |
907 kg |
0.05 kg |
0.5 kg |
| 294 N |
0.005 N |
0.05 N |
8,896 N |
0.5 N |
5 N |
| 025-0000-0394-05 |
110 lb |
0.002 lb |
0.02 lb |
Accuracy =
± Resolution x 2 |
| 50 kg |
0.001 kg |
0.01 kg |
| 489 N |
0.01 N |
0.1 N |
SDHT 2000 - Length Specifications |
| Capacity |
Standard Resolution |
| Resolution |
Accuracy (±) |
| 2, 11, 22, 66,
110 & 200 lb |
0.0005 in |
0.001 in |
| 0.01 mm |
0.02 mm |
| 750, 1,500 &
2,000 lb |
0.0005 in |
0.002 in |
| 0.01 mm |
0.04 mm |
| Accuracy =
± Resolution x 2 |
|
|
|
