| |
|
Lynx
Gages |
Features
- Easy, one button interface
- Precise adjustments reduce scrag
- Multi-function meter monitors performance
- Temperature stability holds length over time
- Lot size counter
- Unsurpassed reliability reduces down time
- Lower cost
- Automatic shutdown on two different events: Consecutive Bad / No Cutoff
 Download User Manual
|
|
The Lynx gage gives you the same adjustment technology as the Panther gage,
but at a lower cost. Its one button interface makes it simple to operate.
Turn and click a few times and you're ready to go.
Two shutdown options allow confident unattended running. If you want scrag reducing
performance at a lower cost and SPC is not an issue, the Lynx gage is for you.
The Lynx Faceplate -
Screen shown is the
Sort Time setting
The bright, multi-function meter can display the current production performance
several different ways for easy monitoring. You can tell from a distance if something
needs your attention.
Lynx software version level is displayed when the gage is turned on. The meter
will flash the software version using the numbered lights on the multifunction
meter. For example, if the Lynx flashes the 2 light then the 1 light, the software
version is 2.1. Software upgrades are free. Contact
us if your Lynx gage needs an upgrade. View the chart below to see what changes
have been made in each version.
Lynx Gage - Specifications |
| Resolution |
0.0001" (0.01 mm) |
| Operating Speed |
Up to 30,000 springs / hour |
| Input Power |
120 / 240, 50/60 Hz, 2A max. |
Sort / Adjust
Output Voltages |
120 VAC (100W)
24 VAC (48W)
24 VDC (24W) |
| Height |
6.5" (165 mm) |
| Width |
10.6" (269 mm) |
| Depth |
9.2" (234 mm) |
| Weight |
8 lb (3.6 kg) |
Lynx Gage - Software Revisions |
| Version |
Description |
| 2.1 |
Scaled meter to set "5" and "25" to the sort points.
Reject springs display beyond these meter points. |
| 1.6 |
Stopped allowing illegal probe setups that were too close to the spring |
| 1.5 |
Refined adjust time calculation.
Allowed probe setup further from spring.
Adjust point setup changed to 10%, 20%, 30%… |
| 1.4 |
Allowed probe zeroing with 1" tip. |
| 1.3 |
Added version display to meter on power up.
Added delay to No Cutoff shutdown to stop accidental shutdowns. |
| 1.2 |
Adjusted math for slight increase in accuracy |
| 1.1 |
Original release. |
|
|
|
