This is the large capacity heavy-duty version of our SDHT. Our most accurate and heavy-duty manual tester has “smart” interchangeable load cells. This is a tester that can measure grams to two decimal places and then change load cells and test up to 2,000 pounds. It has a very rugged quad post design to minimize frame deflection and give the user the most versatility and productivity in a single tester.

The SDHT 2000 is made from a combination of billet aluminum and precision ground steel parts. The rack and pinion lever drive can be upgraded to a Micro Length Adjust. It is also equipped with two positive stops to be used for repetitive testing and comes standard with a 0.437” Ø thru-hole for centering shafts for supporting buckling type compression springs. A stroke lock helps keep things in place while you take measurements or configure tooling. The tester has 5/8-18 tooling holes for convenient fitting.

• Up to 72" range (18" standard)
• Up to 36" stroke (11.5" standard)
• Up to 16" Ø platform (2" standard)
• Standard 0.0005" length resolution
• 2 to 2,000 lb load capacities
• SDHT software package

SDHT software includes these powerful software features, making testing easy and productive:

1. Limit Lights
   Part sorting and a statistical summary printout that includes a histogram and data run chart.
2. Two-Point with Rate
   Test two points with spring rate calculation in one deflection of the spring.
3. Calculated Free Length Measurement
   Calculate the free length of a compression spring.
4. Initial Tension Measurement
   Calculate the initial tension of an extension spring.

• SDHT 2000 Wide Body Datasheet (816 KB)
• SDHT Series User Manual (3.5 MB)

• General Specifications
• Force Specifications
• Length Specifications
• Ordering Information

• Compression and extension testing of force and length
• Built-in 0.437" thru-hole
• Micro-Length Adjust with built-in stops
• Internal 8 hour battery for portable use
• RS 232 data communications port
• User programmable filter
• Length / force offset
• Customizable print headings
• Statistical summary printout
• Built-in 1,800 test point data logger
• Complete computerized tester diagnostics
• 20-bit internal force resolution
• Tracking or peak modes (2,000 samples / sec)
• Load cell and frame deflection compensation
• Mechanical and software overload protection
• Built-in shunt calibration verification
• Digital calibration and linearization
• Backlit digital LED display of force and length
• Wipe-clean embossed key faceplate
• Push-button force and length zeroing
• NIST traceable calibration

Force Specifications
Load Cell Capacity	Standard Resolution
	0-20% FS	20-100% FS
2 lb	0.00002 lb	0.0002 lb
907 g	0.01 g	0.1 g
8.9 N	0.0001 N	0.001 N
11 lb	0.0002 lb	0.002 lb
5 kg	0.1 g	1 g
49 N	0.001 N	0.01 N
22 lb	0.0005 lb	0.005 lb
10 kg	0.2 g	2 g
98 N	0.002 N	0.02 N
66 lb	0.001 lb	0.01 lb
30 kg	0.5 g	5 g
294 N	0.005 N	0.05 N
110 lb	0.002 lb	0.02 lb
50 kg	0.001 kg	0.01 kg
489 N	0.01 N	0.1 N
200 lb	0.005 lb	0.05 lb
91 kg	0.002 kg	0.02 kg
890 N	0.02 N	0.2 N
750 lb	0.02 lb	0.2 lb
340 kg	0.01 kg	0.1 kg
3,336 N	0.1 N	1 N
1,500 lb	0.1 lb	1 lb
680 kg	0.05 kg	0.5 kg
6,672 N	0.5 N	5 N
2,000 lb	0.1 lb	1 lb
907 kg	0.05 kg	0.5 kg
8,896 N	0.5 N	5 N
Accuracy = ± Resolution x 2

Length Specifications
Capacity	Standard Resolution
≤ 200 lb	0.0005 in (± 0.001 in)
	0.01 mm (± 0.02 mm)
≥ 750 lb	0.0005 in (± 0.002 in)
	0.01 mm (± 0.04 mm)

Ordering Information
Part Number	Description	Price
Tester
050-0000-0137-00	SDHT 2000 Wide Body - Super Digital Hand Tester (750 lb capacity, lever operated)	Quote
Factory Options
025-0000-0442-10	Extended Range Rods to 24"	Quote
025-0000-0442-11	Extended Range Rods to 36"	Quote
025-0000-0442-12	Extended Range Rods to 48"	Quote
025-0000-0442-13	Extended Range Rods to 60"	Quote
025-0000-0442-14	Extended Range Rods to 72"	Quote
025-0000-0446-11	Extended Stroke to 18"	Quote
025-0000-0446-12	Extended Stroke to 18" with 0.437" Thru-Hole	Quote
025-0000-0446-13	Extended Stroke to 24"	Quote
025-0000-0446-14	Extended Stroke to 24" with 0.437" Thru-Hole	Quote
025-0000-0446-15	Extended Stroke to 36"	Quote
SDHT Tester Software
050-0000-0073-00	Limit Lights and Full Statistical Analysis	Quote
050-0000-0072-00	2 Point with Rate	Quote
050-1000-0040-00	Calculated Free Length Measurement (includes 2 Point with Rate)	Quote
050-1000-0041-00	Initial Tension Measurement (includes 2 Point with Rate)	Quote
Load Cells
025-0000-0394-01	2 lb Interchangeable Load Cell (2" Ø platform)	Quote
025-0000-0394-02	11 lb Interchangeable Load Cell (3.5" Ø platform)	Quote
025-0000-0394-03	22 lb Interchangeable Load Cell (3.5" Ø platform)	Quote
025-0000-0394-04	66 lb Interchangeable Load Cell (3.5" Ø platform)	Quote
025-0000-0394-05	110 lb Interchangeable Load Cell (3.5" Ø platform)	Quote
025-0000-0394-06	200 lb Interchangeable Load Cell (3.5" Ø platform)	Quote
025-0000-0433-00	750 lb Interchangeable Load Cell (6" Ø platform)	Quote
025-0000-0433-01	1,500 lb Interchangeable Load Cell (6" Ø platform)	Quote
025-0000-0433-02	2,000 lb Interchangeable Load Cell, Round (6" Ø platform, for high rate parts)	Quote
025-0000-0698-00	2,000 lb Stiff Load Cell (12" Ø platform)	Quote
025-0000-0433-05	750 lb Interchangeable Load Cell (16" Ø platform)	Quote
025-0000-0433-07	2,000 lb Interchangeable Load Cell (16" Ø platform)	Quote
Accessories
025-0000-0225-00	Thru-Rod Support Kit (1/16 to 1/8" Ø x 6")	Quote
025-0000-0424-01	Thru-Rod Support Kit (1/16 to 3/8" Ø)	Quote
025-0000-0250-04	Pin Extension Hook Set - 2 / 66 / 110 lb max (Fixed Mount)	Quote
025-0000-0340-03	Wire Extension Hook Set - 10 / 66 / 110 lb max	Quote
025-0000-0523-00	Pin (Swivel Mount) and Wire Extension Hook Set - 2 / 10 / 66 / 110 / 1,000 lb	Quote
025-0000-0183-01	Machined Extension Hook Set - 110 / 750 lb max	Quote
025-0000-0269-00	Machined Extension Hooks - 2000 lb max	Quote
025-0000-0428-00	Wedge Grips 0-0.350" (1 Jaw / 1 Grip Set)	Quote
025-0000-0428-01	Wedge Grips 0.250-0.600" (1 Jaw / 1 Grip Set)	Quote
025-0000-0193-00	Smooth Jaw Wire Chucks - 100 lb	Quote
025-0000-0193-01	Serrated Jaw Wire Chucks - 200 lb	Quote
025-0000-0193-02	Smooth Jaw Wire Chucks - 400 lb	Quote
018-0000-1718-00	5/16-18 M to 10-32 M/F Thread Adapter	Quote
018-0000-1718-01	5/16-18 M to M6 M/F Thread Adapter	Quote
018-0000-1718-02	5/16-18 M to M4 M/F Thread Adapter	Quote
050-0000-0099-00	TUL - Twist Under Load	Quote
Printer & Connectivity Options
025-0000-0464-00	Inkjet Printer (Includes Cable / Adapter 025-0000-0458-00)	Quote
025-0000-0458-00	RS 232 to Parallel Printer Cable / Adapter	Quote
050-0000-0075-00	SSS - PC Statistical & Spreadsheet Interface Software	Quote
Power Supplies (One power supply is included with each new order)
025-1000-0396-00	Power Supply - USA (115 VAC)	Quote
025-1000-0396-04	Power Supply - International (100-240 VAC 50-60 Hz)	Quote