|
|
|
Equipment
List |
Electronic / Mechanical Assembly
Larson Systems is recognized in the Industry as a leading manufacturer
of Spring Inspection Equipment. For over 29 years our high standard
of quality has been reflected in the finished products we produce. With
LSI's capabilities for machining, we can run your prototype or production
parts. Or, we can add our electronic
and mechanical assembly and inspection, to produce complete assemblies, totally "In
House".
Machining Capabilities
Production parts with short lead times are what we are about. Our machines
set up with Indexers, ccm probes, and hydraulic clamping, and are designed for
quick setup, maximum operations per setup and operator productivity. This
means low cost & quick delivery to you.
CNC Machining Centers
Haas VF 5 -The Haas VF5 vertical machining center has 50" x
26" x 25" xyz travels.
It is equipped with a fully integrated 4th axis rotary indexer. The VF-5 has
a 40-taper cartridge spindle that's powered by a 30 hp 10,000-rpm vector Dual-Drive
(Y-Delta) motor running through the 2-speed geared head. The unit has through
spindle coolant and a Haas probing system which functions as a coordinate measuring
system on the machine center. This machine, paired with either our HRT 310B,
SHRT 210H, or our HRT 210H indexers, can cut down on production time, eliminate
scrapped parts, and greatly expand the types of parts that can be produced. The
on board probing and inspection system allows full part
inspection before it even leaves the machining area.
Haas VF 4SS #1 -The Haas VF-4SS vertical machining center has 50" x
20" x
25" xyz
travels. It is equipped with a fully integrated 4th axis indexer. Super VF-4
has an innovative 12,000-rpm inline direct-drive spindle, an ultra-fast tool
changer and 1400-ipm rapids. The direct drive spindle provides better surface
finishes, thermal stability and very quiet operation. The 40+1 side-mount tool
changer take less than 1.5 seconds tool to tool. The unit has through
spindle coolant and a Haas probing system which
functions as a coordinate measuring system on the machine center. This
machine, paired with either our HRT 310B, SHRT 210H, or our HRT 210H indexers,
can also be outfitted with a chick tombstone vice arrangement to run multiple
parts with minimal operator interface.
Haas VF 4SS #2 -The Haas VF-4SS vertical machining center has 50" x
20" x 25" xyz
travels. It is equipped similarly to out other VF4, but with a 24+1 side-mount
tool changer that takes less than 1.5 seconds tool to tool. The unit has a Haas
probing system that allows
for most efficient operation.
Kia KV35C -The Kia can machine parts to fit within a 23.6 x 17.7 x 20
inch envelope. A 10,000 rpm spindle, 4.5 second chip-to-chip tool changes, 20
tool magazine and rapids of 787 IPM. This all adds up to short machine cycles
and high quality competitively priced parts.
Dahlih 610 -The 610 has the capability to machine work pieces that fit
an 18 x 26 x 20 inch envelope. A 6000 rpm spindle means that the machine
is very well suited for fabrication of aluminum parts. A 16 position automatic
tool changer means complete fabrication of parts with no operator intervention.
Rapid travels of 472 in. per minute.
Dahlih 1020 -The work horse, a large work envelope of 20 x 40x 22 inches
allows fabrication of longer parts, but also multiple fixturing of smaller parts,
or several surfaces on the same part. A two speed spindle gives LSI plenty of
power for heavy cuts on alloy steel parts. This machine can automatically change
up to 26 tools to fabricate even very complicated parts.
CNC Drilling / Tapping & Machining
These machines are for high-speed, high precision, and high-rigidity machining
of light alloys and multi-piece set-ups of small parts. They have a work envelope
of 15 x 20 x 13.
Fanuc Robo Drill T14A - A premier high speed CNC Machining Center. This
30 taper machine has 1890 IPM on the X and Y and Z axis, combined with 1 sec
tool changes. It has 14 tools and an 8000 rpm spindle. High Speed Rigid Tapping
to 1/4-20 thd.
Fanuc Robo Drill T10B - A high speed CNC Machining Center. This 30 taper
machine has 1417 IPM on the X and Y and 1181 IPM on the Z axis, combined with
1 sec tool changes. It has 10 Tools and an 8000 rpm spindle. Rigid Tapping to
1/4-20 thd.
Our Robo Drills are set up to allow one person to operate both machines
simultaneously to increase productivity. The operator can easily run the
first operation on machine one, and the second operation on machine two.
Milling Machines
- 3 ea. - Bridgeport Mills with mechanical power draw bars, and x/y axis
digital readout packages.
- 1 ea. - Nichols Production Slotting Mill.
These machines are capable of producing prototype parts and simple operations
on production parts.
Turning Centers
Puma CNC Turning Center - The large bore Puma 10HC, provides a unique combination
of power, rigidity, and accuracy. A powerful 30 hp spindle motor and large 2.95
inch bar working diameter, will handle a maximum 12 inch cutting diameter. The
Puma is fitted with the state of the art 32-Bit Fanuc Controller.
Miscellaneous
- 1 ea. - Hardinge Hand Screw Lathe.
- 1 ea . - South Bend 10 in. diameter x 36 in.
- 1 ea . - Pratt & Whitney 13 in. diameter x 24 in. gear head lathe.
- 2 ea. - Clausing Automatic feed ten spindle drill press.
- 5 ea.-15 in. Drill Presses.
- 1 ea. - Hamilton Tapping Machine.
These machines provide support for the Machining Centers. The ten spindle drill
press produces economical multiple hole patterns, on a production basis.
Coordinate Measuring Machine
Brown & Sharpe MicroVal EM - The MicroVal EM has a part measuring
envelope of 18 x 20 x 16. With learn mode programming and SPC Interface, inspection
is made easy for first article or production runs. The SPC Interface also provides
printed readouts for critical features of parts.
Saws and Material Cutoff Equipment
The Nonferrous Cutoff is the fastest way to cut Aluminum Extrusion, as short
as 1 or 2 seconds per cut, with a 125 micro-inch finish. The Peerless makes short
work of up to 9 x 16 bars in steel or aluminum.
- 1 ea.-12 inch Nonferrous CTD Cutoff Saw.
- 1 ea.-12 inch IBP Nonferrous Cutoff Saw with auto feed.
- 1 ea. - Peer less Horizontal Band Saw 9 x 16 in.
- 1 ea. - Horizontal Band Saw 4 x 6 in.
- 1 ea. - Powermatic 14 in. Band Saw.
Surface Grinding, Sheet Metal & Welding
Kent Surface Grinder - The Kent surface grinder is the latest edition
to our finishing capabilities. With a working surface of 41 x 16 inches,
automatic hydraulic feed of all 3 axis's, a 1 1/2 x 14 inch diameter wheel,
and an adjustable electromagnet, we can quickly and accurately finish your
parts, to precision tolerances.
- 6 x 18 Brown & Sharpe Surface Grinder.
Sheet Metal
- 1 ea.-52 in. x 12 Gauge National Power Shear.
- 1 ea.-72 in. x 35 ton DiAcro Press Brake.
- 2 ea.-10 ton OBI Punch Presses.
- 1 ea.-40 ton Rockford Punch Press.
- 1 ea.-36 in. Pexto Shear.
- 1 ea.-48 in. Brake.
Welding
- 1 ea. - Miller SyncroWave 200 Tig Welder
- 1 ea. - Millermatic 250 Wire Feed.
- 1 ea. - Lincoln 225 Arc Welder.
- 1 ea . - Smith Oxyacetylene Welding.
- 1 ea -4.6 KVA Spot Welder.
Vibratory Finisher
Gemini 1000 Roto Finish - The Roto Finish can complete
your process in house. With 10 cubic feet of processing capacity,
and the ability to handle a 12 inch part, LSI can immediately start the deburring
process when the part leaves the machining center. This eliminates
the usual delay of 2-3 days to send a part for tumbling or deburring and
allows packaging and shipping only a few hours after a part leaves the
machining center. |
|
|
