The E-Force test stand features bi-directional USB which speeds data communications with almost any PC or laptop computer. The E-Force firmware displays prompts and menus that guide the user through all programs, setups and final tests. Windows® like software permits users to perform standard tests, plus Pull or Push to break, Pull or Push to specified load and cycling. E-Force software provides force vs displacement or time to be displayed and the results collected in tabular and graphical format. This information can then be exported to Microsoft® Office products like Excel®.

The E-Force features precision servo gear head and ball screw drive for confident and complete control of the test stand.

All programming of return speed, test speed, distance / deflection set points, cycles, force set points are performed using a PC / Laptop or through the front panel control keypad. (Push and Pull to Break and Yield Tests controlled through a PC or Laptop only.)

The large and easy to read backlit digital display indicates all programmed set points, and indicates test, status of the program setup, force loads and overload alarm warnings. The E-Force provides selectable units of measure in force units. (Lbs., Oz, Kg, N and distance Inches or mm)

The E-Force can be equipped with a variety of accessories including grips and compression fixtures.

The large sample area and 3.38” inch (86mm) throat depth provides for unique and large parts to be tested. Metric English threaded – adjustable base plate provided. A precise and consistent 0.06 to 400 mm/min (0.02 to 15.7 in/min) cross head speed provides for ultra slow creep tests and constant load testing.

• General Specifications
• Dimensions
• Ordering Information

Features	Benefits
PC Control with Software	Hands off operation, reduces errors, speeds tests
Auto reverse for test modes	High Speed return to “home” saves time in multi parts testing
Single model with wide speed range	Meets many testing needs
Easy force gage (load range) changing	Provides for multiple test ranges (0.5 to 200 lbs. (200 gram, 2 N - 100Kg, 1000N)
Intuitive and easy to use front panel controls	Reduces operator training time

Specifications
Capacity	100 kgf (200 lbs.)
Reduction Ratio	1:20
Precision Ball Screw Pitch	4mm / 1 Rotation
Stroke	400 mm (15.7 inch)
Travel Speed	0.6 mm/min (0.02 inch/min) - 400 mm/min (15.7 inch/min)
Drive System	Servo Motor (Trapezoidal thread (pitch 4mm / 1 rotation)
Speed Setting	Selectable Speed Knobs (Speed A and Speed B)
Display	5 digit LED
Cycle (max)	1 - 9,999 times
Analog Signal Output	5 mV/ mm max +/- 2 V (400 mm)
Emergency Switch	Push/Twist and release emergency stop button
Communication Feature	USB 1.1 communication from Test stand to PC
Force Gage Compatilbiity	FGV-X, FGV-200HX and FGV-XY models
Communication Software	Windows based program, virtual front panel compatible with Windows XP/2000
Alarm	Overload protection for test stand motor (stops motor when overload condition occurs).
Work Space	200 mm (7.87 inch) X 280 mm (11.02 inch)
Operating Temperature	0 - 45 degrees Celsius (Non-condensing)
Power Supply	120 V AC/ 60 hz
Weight	23 Kg (50 lbs)

Operating Modes
MANU	MANUAL - Operates to selectable force limits
JOG	JOG - Operates while direction key is pressed
SING	SINGLE - Operates one cycle between upper and lower force limits
CONT	CONTINUOUS - Cycles test between upper and lower force limits.
PROG	PROGRAM - Specific Program Tests (each can store 5 programs on each type)
	TOP: Top Load test with threshold option
	STD: Standard test with preload option
	BREAK: Break point test with force drop detection

Ordering Information
Part Number	Description	Price
Test Stand
	FGS-200PV Motorized Force Gage Test Stand	Quote
Accessories
025-0000-0250-04	Pin Extension Hook Set - 2 / 66 / 110 lb max (Fixed Mount)	Quote
025-0000-0523-00	Pin (Swivel Mount) and Wire Extension Hook Set - 2 / 10 / 66 / 110 / 1,000 lb	Quote
025-0000-0340-03	Wire Extension Hook Set - 10 / 66 / 110 lb max	Quote
025-0000-0183-01	Machined Extension Hook Set - 110 / 750 lb max	Quote
025-0000-0428-00	Wedge Grips 0-0.350" (1 Jaw / 1 Grip Set)	Quote
025-0000-0428-01	Wedge Grips 0.250-0.600" (1 Jaw / 1 Grip Set)	Quote
025-0000-0428-02	Wedge Grips 0-0.600" (1 Jaw / 2 Grip Sets)	Quote
018-0000-1964-00	Wedge Grips 0-0.350" (1 Grip Set)	Quote
018-0000-1971-00	Wedge Grips 0.250-0.600" (1 Grip Set)	Quote
025-0000-0271-00	Wire Crimp Pull Fixture - Upper	Quote
025-0000-0274-00	Wire Crimp Grip Fixture - Lower 110 lb	Quote
025-0000-0193-00	Smooth Jaw Wire Chucks - 100 lb	Quote
025-0000-0193-01	Serrated Jaw Wire Chucks - 200 lb	Quote